Quote:
Originally Posted by solarman216
Hi and welcome, I am not to up on after 98 and certainly Auto's, although my Mrs has just acquired one I have not seen much of it yet, other than I have noticed the speedo not being smooth, so something to look into, but will not be this W/E as got Solar to install, Rick
|
Rick, if you look carefully at the speedo face you can see that the speedo needle balance weight is just binding on the face. I think this is due to the black face not being completely flat. The characteristics of "sticking" change with ambient temperature, presumably as the plastic shrinks/expands.
I think if the needle was pulled away from the face by about 0.5~1.0mm that would "fix" it.