Quote:
Originally Posted by AlexD333
Whoopsie, came up to mini roundabout went to turn, and carried on straight 
Only 5mph though, no damage or anything. I did set it back on but steering us off 
Now recovered to work will have a play in the morning. Night y'all.
Any advise on this appreciated.
 |
When we spoke on the phone about this I did try and explain about the bolt passing into a groove, your pic shows it perfectly, the bolt has to be removed completely to get to the state in your pic, when you did your body lift if you did not remove that bolt it could not have been fitted correctly in the first place, as Rustic says there is no way that can come apart even if the bolt was loose, I will be looking at my scrapper for info, but as we both know yours is a later model and there are differences, Rick
__________________
Ex banger racer now off road maniac 
Lokka on the front with manual hubs
Diff lock on rear
3 inch SS straight through exhaust
Manly winch bumper with 13000 lb winch
10 spike ground anchor, with multiple straps and blocks
Super strong body cills capped with scaffold pole
20% stronger springs all round
aggressive off road tyres on wheels so just swap.
Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.
|