Your Screwfix one will work no problem, but you need to separate the two wires, on the original it had two but the new one uses the outer as one wire the other is inside, so cut the end off completely then with a fine file cut into the outer all the way round about 6 inches from the cut end, bend it back and forth till it breaks and slide it off the inner wire you now have the two wires to work with, the outer sheath and the inner wire, any more questions give me a ring, Rick
__________________
Ex banger racer now off road maniac 
Lokka on the front with manual hubs
Diff lock on rear
3 inch SS straight through exhaust
Manly winch bumper with 13000 lb winch
10 spike ground anchor, with multiple straps and blocks
Super strong body cills capped with scaffold pole
20% stronger springs all round
aggressive off road tyres on wheels so just swap.
Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.
|