[Banshee]

Originally Posted by solarman216

Your Screwfix one will work no problem, but you need to separate the two wires, on the original it had two but the new one uses the outer as one wire the other is inside, so cut the end off completely then with a fine file cut into the outer all the way round about 6 inches from the cut end, bend it back and forth till it breaks and slide it off the inner wire you now have the two wires to work with, the outer sheath and the inner wire, any more questions give me a ring, Rick

I've done exactly what you've suggested above Rick and I've been able to get it from not staying lit at all, to staying lit for a minute or so and then going out again