:::.Nissan 4x4 Owners Club.::: - View Single Post

Banshee · 08-05-2019, 09:09

A few of the lads came around last night and we decided to crack on and get a camera up!!!

I picked my spot on the wall outside and did some more measurements to make sure we weren't going to come through the bedroom wall etc

I worked out roughly where it would come in via the wall in the loft and had to clamber across all of the trusses and pull some insulation out of the way.

We measured the RG59 female connections O/D which was 16mm, we drilled a 20mm hole which turned out to be perfect

The first issue arose when I tried to mate the camera to the base and it looks like due to poor manufacturing tolerances the holes didn't line up so I've had to drill 3 new holes, I'm going to have to complain!!!

Then the final result

And a quick money shot

I'll be messing with angles etc at a later stage

08-05-2019, 09:09	#15
Banshee Moderator Join Date: Jul 2012 Location: West Midlands Vehicle: 04 2.7 SWB Terrano II Van Posts: 13,525	A few of the lads came around last night and we decided to crack on and get a camera up!!! I picked my spot on the wall outside and did some more measurements to make sure we weren't going to come through the bedroom wall etc I worked out roughly where it would come in via the wall in the loft and had to clamber across all of the trusses and pull some insulation out of the way. We measured the RG59 female connections O/D which was 16mm, we drilled a 20mm hole which turned out to be perfect The first issue arose when I tried to mate the camera to the base and it looks like due to poor manufacturing tolerances the holes didn't line up so I've had to drill 3 new holes, I'm going to have to complain!!! Then the final result And a quick money shot I'll be messing with angles etc at a later stage __________________ Moderator 04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter 99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread Engine Transplant - In Progress!!!