Your businesses and what you do!.. - Page 12

makeitfit · 21-05-2013, 21:56

As Stinky says Belfasts are the devils sink

complete and utter ballox. Walk away mate or get them to sign a disclaimer. It wont stay sealed for long and WILL look shit in 6 weeks exactly

Bloody Cuntry Living my arse

solarman216 · 21-05-2013, 21:59

Quote:

Originally Posted by rayf3262

MAF update all built and tested, just got to put in a box with some flying connections. I should get it to you sometime next week.

that would be great, just in time for Slindon on the 26th but no sweat if not, Rick

makeitfit · 21-05-2013, 22:03

Quote:

Originally Posted by solarman216

that would be great, just in time for Slindon on the 26th but no sweat if not, Rick

Hmmm modded MAF is it ?

stinka · 21-05-2013, 22:06

Sounds interesting ...

solarman216 · 21-05-2013, 22:07

Quote:

Originally Posted by makeitfit

As Stinky says Belfasts are the devils sink

complete and utter ballox. Walk away mate or get them to sign a disclaimer. It wont stay sealed for long and WILL look shit in 6 weeks exactly

Bloody Cuntry Living my arse

About what I thought although never done one, but can see the difficulties, thanks for the support, Rick

solarman216 · 21-05-2013, 22:13

Stinka/Makeitfit, don't suppose you fancy a few weeks down here is sunny Sussex in the summer, if Planning is granted, got a project to do that will require your skills, timber brewery in the middle of nowhere have not seen the plans yet but customer is of 30 plus years standing, Rick

makeitfit · 21-05-2013, 22:15

Rick if you do the job and have to butt up the tops to the side of the sink and the back etc. I'd consider sealing the w/top to sink interface with epoxy. You can get coloured tiling epoxy grout that will do quite a nice job on iroko.
Then oil the hell out of it once it's cured.
Dont forget to oil under sides of w/tops too

stinka · 21-05-2013, 22:18

Quote:

Originally Posted by solarman216

Stinka/Makeitfit, don't suppose you fancy a few weeks down here is sunny Sussex in the summer, if Planning is granted, got a project to do that will require your skills, timber brewery in the middle of nowhere have not seen the plans yet but customer is of 30 plus years standing, Rick

Possibly mate, just let me know as it comes up cheers

solarman216 · 21-05-2013, 22:25

Quote:

Originally Posted by makeitfit

Rick if you do the job and have to butt up the tops to the side of the sink and the back etc. I'd consider sealing the w/top to sink interface with epoxy. You can get coloured tiling epoxy grout that will do quite a nice job on iroko.
Then oil the hell out of it once it's cured.
Dont forget to oil under sides of w/tops too

Thanks Pete, will bear that in mind, much appreaciated, but going to talk to the customer first, does not seem they have fully understood what they are undertaking, Rick

makeitfit · 21-05-2013, 22:32

Quote:

Originally Posted by stinka

Possibly mate, just let me know as it comes up cheers

Sounds interesting

solarman216 · 21-05-2013, 22:59

Will pm you both if pp is granted, Rick

stinka · 11-07-2013, 20:37

Blasted this together from 20 sheets of mdf in 3 days this week

Couple of things I would have done differently if the guy wasn't in such a hurry, but for 3 days work I'm happy with the result

darryl · 11-07-2013, 20:44

Quote:

Originally Posted by stinka

Blasted this together from 20 sheets of mdf in 3 days this week

Couple of things I would have done differently if the guy wasn't in such a hurry, but for 3 days work I'm happy with the result

looks tidy mate

stinka · 11-07-2013, 20:45

stinka · 11-07-2013, 20:46

Quote:

Originally Posted by darryl

looks tidy mate

Cheers pal

Nice change from hanging doors, laminate floors and shitty flat pack kitchens anyhow

just wish I could do more bespoke shit

21-05-2013, 22:13	#171
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,319	Stinka/Makeitfit, don't suppose you fancy a few weeks down here is sunny Sussex in the summer, if Planning is granted, got a project to do that will require your skills, timber brewery in the middle of nowhere have not seen the plans yet but customer is of 30 plus years standing, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

21-05-2013, 22:59	#176
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,319	Will pm you both if pp is granted, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

21-05-2013, 21:56	#166
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	As Stinky says Belfasts are the devils sink complete and utter ballox. Walk away mate or get them to sign a disclaimer. It wont stay sealed for long and WILL look shit in 6 weeks exactly Bloody Cuntry Living my arse

21-05-2013, 22:06	#169
stinka Senior Member Join Date: Feb 2012 Location: Staffs Vehicle: '02 Terrano TDI sport lwb Posts: 3,787	Sounds interesting ...

21-05-2013, 22:15	#172
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	Rick if you do the job and have to butt up the tops to the side of the sink and the back etc. I'd consider sealing the w/top to sink interface with epoxy. You can get coloured tiling epoxy grout that will do quite a nice job on iroko. Then oil the hell out of it once it's cured. Dont forget to oil under sides of w/tops too

11-07-2013, 20:37	#177
stinka Senior Member Join Date: Feb 2012 Location: Staffs Vehicle: '02 Terrano TDI sport lwb Posts: 3,787	Blasted this together from 20 sheets of mdf in 3 days this week Couple of things I would have done differently if the guy wasn't in such a hurry, but for 3 days work I'm happy with the result

11-07-2013, 20:45	#179
stinka Senior Member Join Date: Feb 2012 Location: Staffs Vehicle: '02 Terrano TDI sport lwb Posts: 3,787