Washer bottle cap T2 3.0 ltr SVE

johnb5177 · 27-09-2016, 17:22

Hi guys,

For some reason best known to itself, I have mislaid the top cap off my windscreen washer bottle....

Anyone out there (possibly Rick?) likely to have one kicking around spare?

I am happy to pay with Paypal, if that is suitable, as it would have to be posted to me here in France, so please let me know...

Many thanks in advance...

Johnb

solarman216 · 27-09-2016, 20:49

there are several types, post a pic of the bottle top and I will see, Rick

johnb5177 · 27-09-2016, 20:54

Rick,
Thank you, I will do that tomorrow...
John

johnb5177 · 28-09-2016, 12:49

Rick,
I hope this picture will help you decide what cap I need?

Banshee · 28-09-2016, 13:05

Same as mine, there is a yellow collar that goes around the bottle neck and just flips up and down with a little tabbard on the side.

I was just going to reply with, it's a yellow one but I think they were all that colour which was done by many car manufacturers to point out the major check locations that you should be looking at periodically.

solarman216 · 28-09-2016, 20:57

Quote:

Originally Posted by johnb5177

Rick,
I hope this picture will help you decide what cap I need?

That is good, I will have a look on Sunday, Rick

johnb5177 · 29-09-2016, 17:33

Thank you...

johnb5177 · 02-10-2016, 18:44

Bump....

solarman216 · 02-10-2016, 22:12

Sorry mate started work Sat 9am finished Sun 6am so Sunday was missed will look Monday, Rick

solarman216 · 04-10-2016, 21:08

Have two types, yellow is 53/54 mm and white 50 mm think you need the white one, but do not have yellow that size, Rick

Blocky10 · 04-10-2016, 22:50

Quote:

Originally Posted by solarman216

Have two types, yellow is 53/54 mm and white 50 mm think you need the white one, but do not have yellow that size, Rick

I'll measure mine in the morning for you.

johnb5177 · 05-10-2016, 10:10

Blocky,
Thank you for your help.....I am stuck for the moment with a massive lawn renovation, and trying to finish it before it finishes me.
Back in UK from Saturday for a few weeks, so cheaper and simpler postage for Rick...

John

Blocky10 · 05-10-2016, 12:07

johnb5177 · 05-10-2016, 18:24

Blocky,
That looks correct to me, sadly though, I think Rick doesn't have this type in stock, only an alternative different size white one......

So as I don't really have a plan b, can anyone suggest an alternative supply (apart from Nissan of course)......would cncfabs perhaps have one in stock ???
Being a donut, I didn't read Rick's post correctly.......so Rick, you have this correct size in white, do you agree with Blockys caliper (flash tool that) measurements, if so please can I put dibs on it ?
If yes then we can PM to organise payment and dispatch.......

Blocky10 · 05-10-2016, 18:51

Looks like you'll be needing the white one, depending on where Rick took his measurements

27-09-2016, 17:22	#1
johnb5177 Senior Member Join Date: Sep 2013 Location: Swansea, S.Wales Vehicle: 02Terrano II 3.0 SVE Auto Posts: 1,586	Washer bottle cap T2 3.0 ltr SVE Hi guys, For some reason best known to itself, I have mislaid the top cap off my windscreen washer bottle.... Anyone out there (possibly Rick?) likely to have one kicking around spare? I am happy to pay with Paypal, if that is suitable, as it would have to be posted to me here in France, so please let me know... Many thanks in advance... Johnb

27-09-2016, 20:49	#2
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,315	there are several types, post a pic of the bottle top and I will see, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

28-09-2016, 13:05	#5
Banshee Moderator Join Date: Jul 2012 Location: West Midlands Vehicle: 04 2.7 SWB Terrano II Van Posts: 13,525	Same as mine, there is a yellow collar that goes around the bottle neck and just flips up and down with a little tabbard on the side. I was just going to reply with, it's a yellow one but I think they were all that colour which was done by many car manufacturers to point out the major check locations that you should be looking at periodically. __________________ Moderator 04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter 99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread Engine Transplant - In Progress!!!

02-10-2016, 22:12	#9
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,315	Sorry mate started work Sat 9am finished Sun 6am so Sunday was missed will look Monday, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

27-09-2016, 20:54	#3
johnb5177 Senior Member Join Date: Sep 2013 Location: Swansea, S.Wales Vehicle: 02Terrano II 3.0 SVE Auto Posts: 1,586	Rick, Thank you, I will do that tomorrow... John

29-09-2016, 17:33	#7
johnb5177 Senior Member Join Date: Sep 2013 Location: Swansea, S.Wales Vehicle: 02Terrano II 3.0 SVE Auto Posts: 1,586	Thank you...

02-10-2016, 18:44	#8
johnb5177 Senior Member Join Date: Sep 2013 Location: Swansea, S.Wales Vehicle: 02Terrano II 3.0 SVE Auto Posts: 1,586	Bump....

05-10-2016, 10:10	#12
johnb5177 Senior Member Join Date: Sep 2013 Location: Swansea, S.Wales Vehicle: 02Terrano II 3.0 SVE Auto Posts: 1,586	Blocky, Thank you for your help.....I am stuck for the moment with a massive lawn renovation, and trying to finish it before it finishes me. Back in UK from Saturday for a few weeks, so cheaper and simpler postage for Rick... John

05-10-2016, 12:07	#13
Blocky10 Senior Member Join Date: Mar 2014 Location: Welcome to Norwich, a fine city Vehicle: 2004 Terrano 3.0 SVE Auto Posts: 3,601

05-10-2016, 18:24	#14
johnb5177 Senior Member Join Date: Sep 2013 Location: Swansea, S.Wales Vehicle: 02Terrano II 3.0 SVE Auto Posts: 1,586	Blocky, That looks correct to me, sadly though, I think Rick doesn't have this type in stock, only an alternative different size white one...... So as I don't really have a plan b, can anyone suggest an alternative supply (apart from Nissan of course)......would cncfabs perhaps have one in stock ??? Being a donut, I didn't read Rick's post correctly.......so Rick, you have this correct size in white, do you agree with Blockys caliper (flash tool that) measurements, if so please can I put dibs on it ? If yes then we can PM to organise payment and dispatch.......

05-10-2016, 18:51	#15
Blocky10 Senior Member Join Date: Mar 2014 Location: Welcome to Norwich, a fine city Vehicle: 2004 Terrano 3.0 SVE Auto Posts: 3,601	Looks like you'll be needing the white one, depending on where Rick took his measurements