Pay before sending - Page 2

emjaybee · 24-04-2017, 16:07

Quote:

Originally Posted by don simon

I disagree with naming and shaming.
If someone comes into a community such as this to rip people off, a fundamental part of naming and shaming isn't going to worry them in the slightest. Naming them will help others avoid getting ripped off though...

Not sure where you're going with that statement.

don simon · 24-04-2017, 16:19

Quote:

Originally Posted by emjaybee

Not sure where you're going with that statement.

They have no shame...

Thomas61 · 24-04-2017, 16:47

All for the naming and shaming, hate to see this happen to you.

But please watch your wording things like addresses may fall under some elements of the data protection act as you were supplied them for a business transaction purpose.
I believe it is just wording it correctly (others may know) hate to see what has happened happen to you but if you do it just do not want you getting in hot water.

Take care

Blocky10 · 24-04-2017, 19:50

Damn shameful disrespect. It's no excuse but some people are busier than others as you well know Rick. You are the busiest person i know! I think a reminder they've failed to pay, if still no joy then let others know who it is so it doesn't happen again.

I too have no problem paying for goods upfront, especially from these forum members

luke1987 · 24-04-2017, 20:18

I feel your pain Rick we get it all the time at work and being a small family run engineering business it can hurt. But again the other way the amount of cylinder heads and cranks we have stacked up that have had work done to them and not all cheap rubbish mind some £1000+ heads there that have never been collected. Just goes to show the society we live in nowadays.

macabethiel · 25-04-2017, 10:10

There was a lot to be said for the Debtors Prisons of old.

Being ripped off would really annoy me it's as much about the breach of trust as the lack of payment due. Sadly that affects how we view some people in the future.

In my head I would want to put his vehicle windows in but in my heart I know that makes me no better than the debtor so it would remain a private thought not to be voiced here.

briggie · 25-04-2017, 18:54

i would gladly contribute to help offset ricks losses to help restore his faith in our forum

panelbeater · 28-04-2017, 10:18

sorry its happened again to you rick.
when paypal took there cut from my payment to you i just paid again,yes a small amount but needed doing as you never know when i might need you parts again.

perelaar · 28-04-2017, 11:24

I'd still be stuck without a chassis crossmember if it wasn't for Rick! And international sending as well sorted out, no complaints here

No idea how we arranged payment then, I think it was through paypal

briggie · 28-04-2017, 15:36

has there been any update on payment yet ?

solarman216 · 28-04-2017, 20:35

yes one has paid, but nothing from the other, £100.00 but never mind it is my own fault for not sticking with pay up front, Rick

kitchenman · 28-04-2017, 22:08

You should name him/her

solarman216 · 28-04-2017, 22:24

not much point he has not been on here since just before I sent the goods, and who knows he may be sick, on long holiday or maybe his business has failed, the Co that comes up now to address I sent goods is different, Rick

panelbeater · 29-04-2017, 08:08

one done then better than none

johnb5177 · 29-04-2017, 22:01

I have used Rick's very kind and useful spares service, used paypal to fund the purchases.

It is not difficult or demanding.......not to pay for your goods supplied is theft.......lets hope that we do not see this happen again, to a much valued member of what is becoming a very close and friendly community.......

25-04-2017, 10:10	#21
macabethiel Senior Member Join Date: Aug 2008 Location: Derby Vehicle: Freelander & Jeep GC 3.0 Posts: 4,415	The Debtors Prison a Cure for Rick There was a lot to be said for the Debtors Prisons of old. Being ripped off would really annoy me it's as much about the breach of trust as the lack of payment due. Sadly that affects how we view some people in the future. In my head I would want to put his vehicle windows in but in my heart I know that makes me no better than the debtor so it would remain a private thought not to be voiced here.

28-04-2017, 20:35	#26
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,323	yes one has paid, but nothing from the other, £100.00 but never mind it is my own fault for not sticking with pay up front, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

28-04-2017, 22:24	#28
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,323	not much point he has not been on here since just before I sent the goods, and who knows he may be sick, on long holiday or maybe his business has failed, the Co that comes up now to address I sent goods is different, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

24-04-2017, 16:47	#18
Thomas61 Senior Member Join Date: Sep 2014 Location: Hampshire Vehicle: Terrano but now Honda CRV Posts: 658	All for the naming and shaming, hate to see this happen to you. But please watch your wording things like addresses may fall under some elements of the data protection act as you were supplied them for a business transaction purpose. I believe it is just wording it correctly (others may know) hate to see what has happened happen to you but if you do it just do not want you getting in hot water. Take care

24-04-2017, 19:50	#19
Blocky10 Senior Member Join Date: Mar 2014 Location: Welcome to Norwich, a fine city Vehicle: 2004 Terrano 3.0 SVE Auto Posts: 3,601	Damn shameful disrespect. It's no excuse but some people are busier than others as you well know Rick. You are the busiest person i know! I think a reminder they've failed to pay, if still no joy then let others know who it is so it doesn't happen again. I too have no problem paying for goods upfront, especially from these forum members

24-04-2017, 20:18	#20
luke1987 Senior Member Join Date: Sep 2015 Location: Manchester Vehicle: Nissan Terrano 2.7 SE LWB Posts: 258	I feel your pain Rick we get it all the time at work and being a small family run engineering business it can hurt. But again the other way the amount of cylinder heads and cranks we have stacked up that have had work done to them and not all cheap rubbish mind some £1000+ heads there that have never been collected. Just goes to show the society we live in nowadays.

25-04-2017, 18:54	#22
briggie Senior Member Join Date: Mar 2010 Location: peoples democratic republic of west yorkshire Vehicle: " alice " Posts: 10,473	i would gladly contribute to help offset ricks losses to help restore his faith in our forum

28-04-2017, 10:18	#23
panelbeater Senior Member Join Date: Dec 2012 Location: clacton on sea essex Vehicle: nissan terrano 2 2.7 tdi Posts: 1,625	sorry its happened again to you rick. when paypal took there cut from my payment to you i just paid again,yes a small amount but needed doing as you never know when i might need you parts again.

28-04-2017, 11:24	#24
perelaar Senior Member Join Date: Sep 2014 Location: Belgium Vehicle: Terrano II 2.7TDi SWB '97 Posts: 802	I'd still be stuck without a chassis crossmember if it wasn't for Rick! And international sending as well sorted out, no complaints here No idea how we arranged payment then, I think it was through paypal

28-04-2017, 15:36	#25
briggie Senior Member Join Date: Mar 2010 Location: peoples democratic republic of west yorkshire Vehicle: " alice " Posts: 10,473	has there been any update on payment yet ?

28-04-2017, 22:08	#27
kitchenman Senior Member Join Date: Jan 2011 Location: Essex Wescliff Vehicle: maverick 1994 2.7 TD Posts: 1,278	You should name him/her

29-04-2017, 08:08	#29
panelbeater Senior Member Join Date: Dec 2012 Location: clacton on sea essex Vehicle: nissan terrano 2 2.7 tdi Posts: 1,625	one done then better than none

29-04-2017, 22:01	#30
johnb5177 Senior Member Join Date: Sep 2013 Location: Swansea, S.Wales Vehicle: 02Terrano II 3.0 SVE Auto Posts: 1,586	I have used Rick's very kind and useful spares service, used paypal to fund the purchases. It is not difficult or demanding.......not to pay for your goods supplied is theft.......lets hope that we do not see this happen again, to a much valued member of what is becoming a very close and friendly community.......