Go Back   :::.Nissan 4x4 Owners Club.::: > General > The Clubs Virtual Pub

The Clubs Virtual Pub For general chat, so come on in and pull up a chair.

Reply
 
Thread Tools Display Modes
Old 14-10-2018, 22:15   #1
solarman216
Off road maniac
Click here to find out how to become a paid up member
 
solarman216's Avatar
 
Join Date: Dec 2009
Location: Bexhill on Sea
Vehicle: Y60 Patrol Me, 3 ltr Mrs
Posts: 17,298
Default Sea Salvage or similar

Did anyone see this program last week about so called salvage experts raising a sunken boat with air bags? he was saying that they will be inflated to 4000 psi (yes 4000) yea right, I laughed my socks off and turned to another channel, but not before the bags burst through the boat and destroyed it, Rick
__________________
Ex banger racer now off road maniac
Lokka on the front with manual hubs
Diff lock on rear
3 inch SS straight through exhaust
Manly winch bumper with 13000 lb winch
10 spike ground anchor, with multiple straps and blocks
Super strong body cills capped with scaffold pole
20% stronger springs all round
aggressive off road tyres on wheels so just swap.
Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.
solarman216 is offline   Reply With Quote
Old 15-10-2018, 21:14   #2
Banshee
Moderator
 
Banshee's Avatar
 
Join Date: Jul 2012
Location: West Midlands
Vehicle: 04 2.7 SWB Terrano II Van
Posts: 13,525
Default

Quote:
Originally Posted by solarman216 View Post
Did anyone see this program last week about so called salvage experts raising a sunken boat with air bags? he was saying that they will be inflated to 4000 psi (yes 4000) yea right, I laughed my socks off and turned to another channel, but not before the bags burst through the boat and destroyed it, Rick
__________________
Moderator

04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread
Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job
Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank
TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger
Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter


99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread
Engine Transplant - In Progress!!!
Banshee is offline   Reply With Quote
Old 16-10-2018, 14:00   #3
macabethiel
Senior Member
Click here to find out how to become a paid up member
 
Join Date: Aug 2008
Location: Derby
Vehicle: Freelander & Jeep GC 3.0
Posts: 4,415
Question On another tac !

What about the new Dyson V10 that has a motor that rotates at 125,000 rpm what sort of bearings must it have to not wear out in a few months?
macabethiel is offline   Reply With Quote
Old 16-10-2018, 23:54   #4
Thomas-the-Terrano2
Moderator
 
Thomas-the-Terrano2's Avatar
 
Join Date: Dec 2004
Location: Hackenthorpe Sheffield
Vehicle: Terrano2 R20 lwb 2.7TDi
Posts: 5,233
Default

Quote:
Originally Posted by macabethiel View Post
What about the new Dyson V10 that has a motor that rotates at 125,000 rpm what sort of bearings must it have to not wear out in a few months?
good grief that equates to about 2000 rev per second, sounds to be mid range
speed wise for a turbo charger.
__________________
M6YTB / 20YTB

'60' 2010 Ford C Max Zetec 1.6i, black

'56' 2006 Jeep Grand Cherokee 3.0TD, silver

2021 Bailey Pegasus Grade SE Turin caravan

Smile, its more likely to confuse.

One Life, Don't Just Live It, Drive a Nissan, or ...... a Jeep.

Owner of Nissan 4x4s 2005 to 2019, and maybe in the future too!
Thomas-the-Terrano2 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump


All times are GMT +1. The time now is 13:12.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Images online photo albums