|
The Clubs Virtual Pub For general chat, so come on in and pull up a chair. |
|
Thread Tools | Display Modes |
30-04-2019, 10:25 | #1 |
Senior Member
Join Date: Aug 2008
Location: Derby
Vehicle: Freelander & Jeep GC 3.0
Posts: 4,415
|
Torque Sticks for Impact Tools
Anyone here used a Torque Stick - do they work?
|
30-04-2019, 11:26 | #2 |
Senior Member
Join Date: Jan 2011
Location: southwest gloucester
Vehicle: Nissan Terrano 2.7 2003
Posts: 615
|
you tube has some videos on them and there are different colored for different torques on my to get list they come in a set usually
|
30-04-2019, 20:08 | #3 |
Senior Member
Join Date: Aug 2008
Location: Derby
Vehicle: Freelander & Jeep GC 3.0
Posts: 4,415
|
I am getting just one to try first a Sealey rated at 110 NM.
I have a decent Britool Torque wrench so I will see how it compares, looks as though there is a knack to using them correctly.
Then will need a 17 mm Impact Socket - I will try to get one from Halfrauds as they do some stuff with a lifetime warranty at sensible money. A few years ago I returned a Teng 1/4" drive ratchet that had broke (due to misuse) I had no receipt but the case etc was in clean condition even though it was 3 years old. Whole thing replaced with a new set - no quibble still good now about 10 years old! |
Thread Tools | |
Display Modes | |
|
|