wanted - EGR blanking plate - Page 3

clivvy · 10-09-2012, 20:59

yes Ryan, it really is that simple. a little awkward as far as I can see, but i had a good look at the weekend, and i reckon it can be done through the top using a thin but decent quality long wrench, 1/4" so it will fit. Two bolts, slide in the blanking plate, bolt back up. MIGHT have to loosen off at the exhaust side for movement, im not 100% sure yet, but shouldnt be too tricky if that is the case.

Peter, yes, i emailed the chap, he doesnt have any, and can only make one if i can get the dimensions ?!

96terrano · 10-09-2012, 21:14

Quote:

Originally Posted by clivvy

yes Ryan, it really is that simple. a little awkward as far as I can see, but i had a good look at the weekend, and i reckon it can be done through the top using a thin but decent quality long wrench, 1/4" so it will fit. Two bolts, slide in the blanking plate, bolt back up. MIGHT have to loosen off at the exhaust side for movement, im not 100% sure yet, but shouldnt be too tricky if that is the case.

Peter, yes, i emailed the chap, he doesnt have any, and can only make one if i can get the dimensions ?!

i tried to take the egr off my scrappy but because theres no gear box, the engine has fell back against the bulkhead, so i couldnt get dimentions

i would think they are just the same on th TD and TDI

the egr looks fairly simple to get from under the wheel arch, i can actually get my arm right up between the starter and engine and feel the bolts,, thats the good thing about having long thin arms

larson · 13-09-2012, 18:44

clive get me dimensions and i will make you one at work (free).. and half dozen more for other people posted for £1 each. i have a lazer at my disposel

larson · 13-09-2012, 18:47

send me a text clive if you get the dimensions as i dont sign in here often

(RIP) PLANK · 13-09-2012, 19:09

Does the EGR have a gasket? if so could you get a new one and use it as a template for a blanking plate

Even post it to Larson, to take up his very generous offer

(RIP) PLANK · 13-09-2012, 19:10

what about this:

http://www.ebay.co.uk/itm/NISSAN-D22...item19d4b8e57f

96terrano · 13-09-2012, 19:12

Quote:

Originally Posted by larson

clive get me dimensions and i will make you one at work (free).. and half dozen more for other people posted for £1 each. i have a lazer at my disposel

could i have one to please?

i'm sure someone will get the dimensions, i'll try and get the egr off my old terrano

stinka · 13-09-2012, 19:38

Quote:

Originally Posted by PLANK

what about this:

http://www.ebay.co.uk/itm/NISSAN-D22...item19d4b8e57f

Wrong shape

stinka · 13-09-2012, 19:41

Quote:

Originally Posted by clivvy

yes Ryan, it really is that simple. a little awkward as far as I can see, but i had a good look at the weekend, and i reckon it can be done through the top using a thin but decent quality long wrench, 1/4" so it will fit. Two bolts, slide in the blanking plate, bolt back up. MIGHT have to loosen off at the exhaust side for movement, im not 100% sure yet, but shouldnt be too tricky if that is the case.

Peter, yes, i emailed the chap, he doesnt have any, and can only make one if i can get the dimensions ?!

All very well but you need sealant of some sort or you'll probably get a boost leak from the inlet manifold side, its no different to bolting up the inlet manifold to the head and u wouldn't do that without a gasket

I used copper rtv in the end and blanked both sides doing away with the egr valve

96terrano · 13-09-2012, 19:50

Quote:

Originally Posted by stinka

All very well but you need sealant of some sort or you'll probably get a boost leak from the inlet manifold side, its no different to bolting up the inlet manifold to the head and u wouldn't do that without a gasket

I used copper rtv in the end and blanked both sides doing away with the egr valve

what about exhaust sealant?

stinka · 13-09-2012, 19:58

copper rtv will be fine

96terrano · 13-09-2012, 20:13

Quote:

Originally Posted by stinka

copper rtv will be fine

fair enough

glen · 14-09-2012, 06:59

so on Egr when stopping in my newer T2 I get not all the time Engine judder like could stall
Never noticed in my 98 one if you drive like you have just passed you test today stopping in the gear you are in like 3rd its better, but i passed early 80's. I am a go down the gears trying to change because wife did advanced driving and its about saving fuel. and brake are better ABS Until a new driver runs into the back of you on a steep down hill in 4th

10-09-2012, 20:59	#31
clivvy Senior Member Join Date: Mar 2009 Location: Huddersfield Vehicle: Terrano 03 LWB Posts: 6,947	yes Ryan, it really is that simple. a little awkward as far as I can see, but i had a good look at the weekend, and i reckon it can be done through the top using a thin but decent quality long wrench, 1/4" so it will fit. Two bolts, slide in the blanking plate, bolt back up. MIGHT have to loosen off at the exhaust side for movement, im not 100% sure yet, but shouldnt be too tricky if that is the case. Peter, yes, i emailed the chap, he doesnt have any, and can only make one if i can get the dimensions ?!

13-09-2012, 18:44	#33
larson Senior Member Join Date: Jun 2009 Location: moomin vally Posts: 1,138	clive get me dimensions and i will make you one at work (free).. and half dozen more for other people posted for £1 each. i have a lazer at my disposel

13-09-2012, 18:47	#34
larson Senior Member Join Date: Jun 2009 Location: moomin vally Posts: 1,138	send me a text clive if you get the dimensions as i dont sign in here often

13-09-2012, 19:09	#35
(RIP) PLANK Senior Member Join Date: Mar 2006 Location: Central England, in the Heart of the Black Country Vehicle: T2 2004 TDI SE LWB Posts: 7,740	Does the EGR have a gasket? if so could you get a new one and use it as a template for a blanking plate Even post it to Larson, to take up his very generous offer

13-09-2012, 19:10	#36
(RIP) PLANK Senior Member Join Date: Mar 2006 Location: Central England, in the Heart of the Black Country Vehicle: T2 2004 TDI SE LWB Posts: 7,740	what about this: http://www.ebay.co.uk/itm/NISSAN-D22...item19d4b8e57f

13-09-2012, 19:58	#41
stinka Senior Member Join Date: Feb 2012 Location: Staffs Vehicle: '02 Terrano TDI sport lwb Posts: 3,787	copper rtv will be fine

14-09-2012, 06:59	#43
glen Senior Member Join Date: Dec 2004 Location: Shipley West yorkshire Vehicle: Terrano 2 2002 Posts: 519	so on Egr when stopping in my newer T2 I get not all the time Engine judder like could stall Never noticed in my 98 one if you drive like you have just passed you test today stopping in the gear you are in like 3rd its better, but i passed early 80's. I am a go down the gears trying to change because wife did advanced driving and its about saving fuel. and brake are better ABS Until a new driver runs into the back of you on a steep down hill in 4th