Need recovery from Brampton :( Banshee's Turbo gone BANG - Page 4

makeitfit · 01-05-2018, 10:36

I had my turbo modified and included 360 bearings, so don't get bogged down looking for one if you're refurbing
Good luck ☺

Banshee · 01-05-2018, 16:05

Quote:

Originally Posted by makeitfit

I had my turbo modified and included 360 bearings, so don't get bogged down looking for one if you're refurbing
Good luck ☺

Hurry up home from Greece and get me details!!!!!!!

Banshee · 03-05-2018, 06:01

So I've contacted pretty much everyone I can find on eBay breaking a 2.7 2004 onwards, rang CNCFabs who doesnt answer the phone ever anymore, Mental Mickey has gone AWOL too.

James only has older ones

Everywhere I call for a refurb is coming in at £300 plus and this is the only unit I can see "ready to go"

https://rover.ebay.com/rover/0/0/0?m...2F321262879342

jims-terrano · 03-05-2018, 06:43

Are you staying standard then Banshee?

By the way yes I’ve noticed CNC doesn’t seem to answer texts. Hope he’s OK.

Banshee · 03-05-2018, 07:16

Quote:

Originally Posted by jims-terrano

Are you staying standard then Banshee?

By the way yes I’ve noticed CNC doesn’t seem to answer texts. Hope he’s OK.

He must be because I constantly see him posting Terrano bits on eBay

macabethiel · 03-05-2018, 10:01

Just seen the pictures on this post TBH I would be in a pit of despair had that been my truck.

Hope you manage to get a turbo fix for sensible money !

Then you will need plenty of Gunk to wash off all that oil mess.

Banshee · 03-05-2018, 10:07

Quote:

Originally Posted by macabethiel

Just seen the pictures on this post TBH I would be in a pit of despair had that been my truck.

Hope you manage to get a turbo fix for sensible money !

Then you will need plenty of Gunk to wash off all that oil mess.

You cant let it get you down mate, nobody else is going to get it sorted for me because I'm sulking about it. Just got to pick up the spanners and then do your best to get it back on track without spending too much coin.

I'll have it clean when I get it all back together.

makeitfit · 03-05-2018, 18:37

Why not just get a T25 or T28 turbo are they not the same

Banshee · 03-05-2018, 18:42

Quote:

Originally Posted by makeitfit

Why not just get a T25 or T28 turbo are they not the same

I want to know what you did!!!!

makeitfit · 03-05-2018, 19:06

On a boat in Corfu 🤣 will find info when I get back but you can get the cartridge bit for 70 quid

162020055777

elty001 · 03-05-2018, 19:15

T28 Turbo copy.jpg

elty001 · 03-05-2018, 19:16

T25 turbo.jpg

elty001 · 03-05-2018, 19:20

I always thought the same turbo was used across the range of years and models but as I've found out over the last week there are a few variables.
Not saying they wouldn't fit and work but thats on for the guinea pigs.

Banshee · 03-05-2018, 19:53

Quote:

Originally Posted by elty001

I always thought the same turbo was used across the range of years and models but as I've found out over the last week there are a few variables.
Not saying they wouldn't fit and work but thats on for the guinea pigs.

Need me a Frankensteiner

03-05-2018, 06:01	#48
Banshee Moderator Join Date: Jul 2012 Location: West Midlands Vehicle: 04 2.7 SWB Terrano II Van Posts: 13,525	So I've contacted pretty much everyone I can find on eBay breaking a 2.7 2004 onwards, rang CNCFabs who doesnt answer the phone ever anymore, Mental Mickey has gone AWOL too. James only has older ones Everywhere I call for a refurb is coming in at £300 plus and this is the only unit I can see "ready to go" https://rover.ebay.com/rover/0/0/0?m...2F321262879342 __________________ Moderator 04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter 99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread Engine Transplant - In Progress!!!

03-05-2018, 10:01	#51
macabethiel Senior Member Join Date: Aug 2008 Location: Derby Vehicle: Freelander & Jeep GC 3.0 Posts: 4,415	All that oil....euhhhhhh Just seen the pictures on this post TBH I would be in a pit of despair had that been my truck. Hope you manage to get a turbo fix for sensible money ! Then you will need plenty of Gunk to wash off all that oil mess.

01-05-2018, 10:36	#46
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	I had my turbo modified and included 360 bearings, so don't get bogged down looking for one if you're refurbing Good luck ☺

03-05-2018, 06:43	#49
jims-terrano Senior Member Join Date: Sep 2004 Location: UK Posts: 12,965	Are you staying standard then Banshee? By the way yes I’ve noticed CNC doesn’t seem to answer texts. Hope he’s OK.

03-05-2018, 18:37	#53
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	Why not just get a T25 or T28 turbo are they not the same

03-05-2018, 19:06	#55
makeitfit Senior Member Join Date: Apr 2008 Location: on the beach WEST WALES Vehicle: Maverick TDi BLACK mmm Posts: 15,136	On a boat in Corfu 🤣 will find info when I get back but you can get the cartridge bit for 70 quid 162020055777

03-05-2018, 19:15	#56
elty001 Senior Member Join Date: Feb 2008 Location: Aflreton,Derbyshire. Vehicle: 2000se+ 2.7tdi terrano II Posts: 6,825	T28 Turbo copy.jpg

03-05-2018, 19:16	#57
elty001 Senior Member Join Date: Feb 2008 Location: Aflreton,Derbyshire. Vehicle: 2000se+ 2.7tdi terrano II Posts: 6,825	T25 turbo.jpg

03-05-2018, 19:20	#58
elty001 Senior Member Join Date: Feb 2008 Location: Aflreton,Derbyshire. Vehicle: 2000se+ 2.7tdi terrano II Posts: 6,825	I always thought the same turbo was used across the range of years and models but as I've found out over the last week there are a few variables. Not saying they wouldn't fit and work but thats on for the guinea pigs.