|
I'm new here, please be gentle This is where you can "introduce yourself". A chance for you as a new member to say hello and for you to tell us about yourselves, your truck and your other interests. |
|
Thread Tools | Display Modes |
16-01-2010, 21:57 | #16 |
Senior Member
Join Date: May 2009
Location: Roaming Nomad
Vehicle: 1995 SWB Terrano
Posts: 5,370
|
30x10.50R15 will go straight on with no mods
31x10.50R15 will go straight on the rear but you will have to trim the front arch by about an inch from the bottom of the spat to the bottom of the wing. Its quick & easy plus it still looks ok 33x12.50R15 will need alot of front cutting & some on the rear 35,37 inch you will need alot of cutting & "extreme-4x4" aka Colin will tell you more if you want to go up that far |
16-01-2010, 23:24 | #17 |
Guest
Posts: n/a
|
Hi I'am also new to the site and looking for advice on tyres. Will 31 x 10.5 x 15 so on standard rims? Or would I need to change my wheels? I have 15inch 6 spoke steels on with 235 x 75 x 15r at the moment.
Great site well worth the membership cheers Steve |
16-01-2010, 23:28 | #18 |
Senior Member
Join Date: Apr 2008
Location: on the beach WEST WALES
Vehicle: Maverick TDi BLACK mmm
Posts: 15,136
|
The tyres will fit on your rims but you will need to trim a bit off the truck. Just take the mud flaps off and then hammer flat the inner wing flange. Simples.
Welcome by the way |
16-01-2010, 23:48 | #19 |
Guest
Posts: n/a
|
Thanks for the welcome triming the trucks not a problem just wanted to be sure they would fit on the rims before ordering them. Also I'am going to raise the truck but am desprate for new rubber and cant afford to do both at the moment will the tyre fit without lifting? I am going for the kumho kl71 after looking at some of your pics (makeitfit) truck look smart. Thanks for the help
|
17-01-2010, 18:21 | #20 |
Senior Member
Join Date: Apr 2008
Location: on the beach WEST WALES
Vehicle: Maverick TDi BLACK mmm
Posts: 15,136
|
I had 31s on my old truck with no issues, but it did have a 1 1/2" suspension lift
So I'm not sure how much triming will be needed without, but hey, if it touches cut it |
17-01-2010, 18:36 | #21 | |
Senior Member
Join Date: May 2009
Location: Roaming Nomad
Vehicle: 1995 SWB Terrano
Posts: 5,370
|
Quote:
I'm on them too Good choice If ya not worried about trimming then go straight to 33's Try here www.camskil.com as my 4 came in @ £350 All i've done is wound the torsion bar up & +2" shocks on the rear Trying hard not to body lift |
|
Thread Tools | |
Display Modes | |
|
|