Your businesses and what you do!.. - Page 11

solarman216 · 21-05-2013, 18:51

Quote:

Originally Posted by makeitfit

Biscuit joint it and only glue if it's a short length. You should allow for the oak to move. So a good silicone will suffice for the joint and then bolt clamps to keep the joint tight

Thanks for that Pete, it is Iroko, and the join will be 600 mm corner and I am not sure about the oiling as it will/may effect the bond, it also has a Belfast sink that they have designed the WT to "but" to the sides and back of the sink with no WT at the front and about 10 mm higher but the sink is not perfectly straight on the sides, I think it would have been better to have the WT sitting on the sink, what are your thoughts, Rick

stinka · 21-05-2013, 18:56

I always have a Belfast under top with Worktop over hanging about 25mm to the 3 sides. I cut a trenched "drip" about 5 mm deep on the underside about 10mm back to stop water running back along underside of top

stinka · 21-05-2013, 18:59

Here's one I did a couple of years ago

They are shit btw, I'd never have one, most customers hate them after a couple of weeks unless they have a dish washer and its just for show, as they are so deep your back aches from bending over

I usually talk customers out of having one

Fez_uk · 21-05-2013, 19:01

I am a electronics engineer, working in production. Only a small business but we ship worldwide most days.

Also do some of the packing of the stuff we make.

solarman216 · 21-05-2013, 19:10

Quote:

Originally Posted by stinka

I always have a Belfast under top with Worktop over hanging about 25mm to the 3 sides. I cut a trenched "drip" about 5 mm deep on the underside about 10mm back to stop water running back along underside of top

that sounds like how I would design it, makes perfect sense, as they have fitted the sink already I do not know if it can be altered, perhaps I should stay quiet, but problem is making a nice job of the sink WT junction all I can think of is a nice bead of brown silicon but it will not be long lived, or as the WT is about 10 mm higher put a rebate so the 10 mm bit overhangs but it does not give me a lot to play with for a drip groove, and also the block joins will be weakened, ??? Rick

solarman216 · 21-05-2013, 19:16

Quote:

Originally Posted by stinka

Here's one I did a couple of years ago

They are shit btw, I'd never have one, most customers hate them after a couple of weeks unless they have a dish washer and its just for show, as they are so deep your back aches from bending over

I usually talk customers out of having one

Totally agree, would not have one even if gifted, but cannot talk them out of it as he has done all the rest himself and made a nice job, although not to my taste, but he baulked at the WT as has no router etc, only got involved cos the front door 3 ft x 7 ft timber half glazed has rotted and will have to be replaced, Rick

Barrbeast · 21-05-2013, 19:56

Quote:

Originally Posted by jims-terrano

Tractors are good especially when they are grey and made by Harry's company

Much respect for the grey Fergie

although I'm an International man myself... and it is nice having a cab and power steering!

Dorn1964 · 21-05-2013, 20:00

Quote:

Originally Posted by mav

As we have a lot of members who own there own businesses i have started this thread for those who would like to let others know what they can offer them or let them know what they do or sell.

You can add 2 photos of your products and list your services or what else you have to offer, Nuts and bolts, Mountain bikes, Banners and signs, 4x4 repairs, ect, ect.

(Send me your photos and i will add them to your post)

Ok well I sell hair extensions and other beauty / hair products.... here's my shop...
http://stores.ebay.co.uk/sodivahairextensions not that any of you guys will be interested.. lol, but who knows......

Dorn1964 · 21-05-2013, 20:02

Quote:

Originally Posted by Dorn1964

Ok well I sell hair extensions and other beauty / hair products.... here's my shop...
http://stores.ebay.co.uk/sodivahairextensions not that any of you guys will be interested.. lol, but who knows......

Oh and my regular job is as a finance manager for a well known hospital group

rayf3262 · 21-05-2013, 20:38

I work for these guys:
http://www.blackmagicdesign.com/products/

solarman216 · 21-05-2013, 21:17

Quote:

Originally Posted by rayf3262

I work for these guys:
http://www.blackmagicdesign.com/products/

Bally whatsit, I understood the video bit, lost the rest, Rick

rayf3262 · 21-05-2013, 21:27

Quote:

Originally Posted by solarman216

Bally whatsit, I understood the video bit, lost the rest, Rick

With a few minor exceptions its all video related kit.
The majority of it is aimed at broadcast company's and related businesses.

solarman216 · 21-05-2013, 21:33

I can post a pic on here, and a short vid via utube and that is me done, getting too old for all this new stuff, Rick

solarman216 · 21-05-2013, 21:37

Sooner play in the mud, no brains needed, just play and relax, any news on the maf upgrade? not pushing just interested, Rick

rayf3262 · 21-05-2013, 21:51

MAF update all built and tested, just got to put in a box with some flying connections. I should get it to you sometime next week.

21-05-2013, 21:33	#163
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,324	I can post a pic on here, and a short vid via utube and that is me done, getting too old for all this new stuff, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

21-05-2013, 21:37	#164
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,324	Sooner play in the mud, no brains needed, just play and relax, any news on the maf upgrade? not pushing just interested, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

21-05-2013, 18:56	#152
stinka Senior Member Join Date: Feb 2012 Location: Staffs Vehicle: '02 Terrano TDI sport lwb Posts: 3,787	I always have a Belfast under top with Worktop over hanging about 25mm to the 3 sides. I cut a trenched "drip" about 5 mm deep on the underside about 10mm back to stop water running back along underside of top

21-05-2013, 18:59	#153
stinka Senior Member Join Date: Feb 2012 Location: Staffs Vehicle: '02 Terrano TDI sport lwb Posts: 3,787	Here's one I did a couple of years ago They are shit btw, I'd never have one, most customers hate them after a couple of weeks unless they have a dish washer and its just for show, as they are so deep your back aches from bending over I usually talk customers out of having one

21-05-2013, 19:01	#154
Fez_uk Senior Member Join Date: Sep 2010 Location: Mid-Wales Vehicle: Maverick 2.7 - Patrol 4.2 Posts: 5,645	I am a electronics engineer, working in production. Only a small business but we ship worldwide most days. Also do some of the packing of the stuff we make.

21-05-2013, 20:38	#160
rayf3262 Senior Member Join Date: Nov 2009 Location: Norfolk, Poringland NR14 Vehicle: Terrano 3.0 SVE 2002 Posts: 1,549	I work for these guys: http://www.blackmagicdesign.com/products/

21-05-2013, 21:51	#165
rayf3262 Senior Member Join Date: Nov 2009 Location: Norfolk, Poringland NR14 Vehicle: Terrano 3.0 SVE 2002 Posts: 1,549	MAF update all built and tested, just got to put in a box with some flying connections. I should get it to you sometime next week.