Latest project started Monday to keep me busy - Page 3

solarman216 · 15-09-2017, 20:57

Spent the whole day dismantling that fryer, went off for the trailer and it pissed down, so forgot the idea today, and even if I wanted and I dont, could not do it tomorrow as road is shut Sat and Sun due to French market, so Monday will be a busy day, Rick

Banshee · 15-09-2017, 21:25

Quote:

Originally Posted by solarman216

Spent the whole day dismantling that fryer, went off for the trailer and it pissed down, so forgot the idea today, and even if I wanted and I dont, could not do it tomorrow as road is shut Sat and Sun due to French market, so Monday will be a busy day, Rick

You sell the fryer in the end Rick?

solarman216 · 15-09-2017, 23:07

No Zac, once I started to take it to bits discovered that all the bolts were "whitworth" so how old is that? whitworth and BSF came before UNF and UNC and we have been metric for years, no wonder when owner put it on Ebay for 0.99p it attracted no bids, but I now have lots of SS with some nice folds which I am sure will come in handy later, plus loads of SS scrap which at £450 a tonne is good,Rick

Banshee · 16-09-2017, 08:46

Quote:

Originally Posted by solarman216

No Zac, once I started to take it to bits discovered that all the bolts were "whitworth" so how old is that? whitworth and BSF came before UNF and UNC and we have been metric for years, no wonder when owner put it on Ebay for 0.99p it attracted no bids, but I now have lots of SS with some nice folds which I am sure will come in handy later, plus loads of SS scrap which at £450 a tonne is good,Rick

Fair play

Blocky10 · 16-09-2017, 14:41

Loving the thread Rick

solarman216 · 18-09-2017, 19:20

Not much to see today, spent my time moving all the scrap (two trailer loads) from the shop to the yard, so now we have a bit more room to move around, Kieth and his mate screeded the new kitchen floor, pics tomorrow,Rick

Banshee · 19-09-2017, 14:35

Lovely trailer Rick!! That yours or you hire it?

Sent from my SM-G930F using Tapatalk

solarman216 · 19-09-2017, 22:05

Not mine, it belongs to Dave who rents a part of the yard for scaffold storage, no pics today as did another trailer load with the two canopies that were still fitted and some more ducting and hard core, prior to that removed the walk in freezer and transported it to a shop two streets away, had intended to reassemble it today but they needed time to empty the chest and upright freezers to make space, so came back and did the canopies while the trailer was available, yet more to the SS scrap pile, Rick

solarman216 · 20-09-2017, 20:43

Floor screed that went down Monday

solarman216 · 20-09-2017, 20:46

Old canopy removed, ceiling shot

solarman216 · 20-09-2017, 20:48

Uneven floor to be sorted including buried pipes

solarman216 · 20-09-2017, 20:50

Where freezer was, now going to be Gents WC

solarman216 · 20-09-2017, 20:52

Another view of buried pipes all coming out

solarman216 · 20-09-2017, 20:56

Screed on here, more than 25mm dif in floor levels but took it as high as I could without dismantling and removing walk in fridge as not an option, given that my deadline is 5th November opening date

solarman216 · 20-09-2017, 20:58

Pipes gone

15-09-2017, 20:57	#31
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,319	Spent the whole day dismantling that fryer, went off for the trailer and it pissed down, so forgot the idea today, and even if I wanted and I dont, could not do it tomorrow as road is shut Sat and Sun due to French market, so Monday will be a busy day, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

15-09-2017, 23:07	#33
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,319	No Zac, once I started to take it to bits discovered that all the bolts were "whitworth" so how old is that? whitworth and BSF came before UNF and UNC and we have been metric for years, no wonder when owner put it on Ebay for 0.99p it attracted no bids, but I now have lots of SS with some nice folds which I am sure will come in handy later, plus loads of SS scrap which at £450 a tonne is good,Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

19-09-2017, 14:35	#37
Banshee Moderator Join Date: Jul 2012 Location: West Midlands Vehicle: 04 2.7 SWB Terrano II Van Posts: 13,525	Lovely trailer Rick!! That yours or you hire it? Sent from my SM-G930F using Tapatalk __________________ Moderator 04' Terrano II SE 2.7 TDi SWB Commercial in Silver - Project Thread Toyo Open Country M/T 33's on 10J Steels, Super Strong Steering Job Navara D22 Snorkel, Front LOKKA, Maunal Hubs, EGR Blank TunitII ECU Chip, 3" Body Lift, 2" Suss Lift, Heat Exchanger Black Interior, 3.0 Borg&Beck Clutch, Eckes Heated Fuel Filter 99' Y61 Patrol GR SE 2.8 TD6 LWB in Blue/Silver - Project Thread Engine Transplant - In Progress!!!

19-09-2017, 22:05	#38
solarman216 Off road maniac Join Date: Dec 2009 Location: Bexhill on Sea Vehicle: Y60 Patrol Me, 3 ltr Mrs Posts: 17,319	Not mine, it belongs to Dave who rents a part of the yard for scaffold storage, no pics today as did another trailer load with the two canopies that were still fitted and some more ducting and hard core, prior to that removed the walk in freezer and transported it to a shop two streets away, had intended to reassemble it today but they needed time to empty the chest and upright freezers to make space, so came back and did the canopies while the trailer was available, yet more to the SS scrap pile, Rick __________________ Ex banger racer now off road maniac Lokka on the front with manual hubs Diff lock on rear 3 inch SS straight through exhaust Manly winch bumper with 13000 lb winch 10 spike ground anchor, with multiple straps and blocks Super strong body cills capped with scaffold pole 20% stronger springs all round aggressive off road tyres on wheels so just swap. Aim to get stuck and be completely self sufficient in extraction, love getting muddy, 2ft deep is good but rare.

16-09-2017, 14:41	#35
Blocky10 Senior Member Join Date: Mar 2014 Location: Welcome to Norwich, a fine city Vehicle: 2004 Terrano 3.0 SVE Auto Posts: 3,601	Loving the thread Rick