|
I'm new here, please be gentle This is where you can "introduce yourself". A chance for you as a new member to say hello and for you to tell us about yourselves, your truck and your other interests. |
|
Thread Tools | Display Modes |
27-05-2018, 23:19 | #1 |
Junior Member
Join Date: May 2018
Location: Wales
Vehicle: terrano
Posts: 14
|
Wagon welding advice
Wagon went in thursday (03 2.7 lwb terrano ) weldinG worse than we thought so hay ho collecting some 3mm plate and redoing the back end .
As it is going to be on the ramp for a few days what sort of underbody protection do people fit as cant find a lot on the web some of the placesits going to go it will need a front bash plate/sump gaurd anyone done there own version and have a drawing with sizes and what needs protecting from rocks underneath ? Cheers Gerry I tried to post in the terrano section and could not |
28-05-2018, 07:08 | #2 |
Senior Member
Join Date: Sep 2004
Location: UK
Posts: 12,965
|
Sorry can’t help with bash plates as I’m just keeping my trucks standard.
Chances are you can’t post in Terrano section because you’ll need full membership for that but I’m sure someone else will be along to answer both questions. |
28-05-2018, 07:52 | #3 |
Senior Member
Join Date: Sep 2014
Location: Yorkshire, J33 M62
Vehicle: 2000 Terrano lwb 2.7TDI
Posts: 5,500
|
Give me a couple of hours to come round and I'll search the forum for a picture someone posted of a full length bash plate for a swb
|
28-05-2018, 19:03 | #4 |
Senior Member
Join Date: Sep 2014
Location: Yorkshire, J33 M62
Vehicle: 2000 Terrano lwb 2.7TDI
Posts: 5,500
|
Heres one mate, try searching the make of it, might come up with some specs, this is for a swb though pal
|
28-05-2018, 21:33 | #5 |
Senior Member
Join Date: Sep 2013
Location: Swansea, S.Wales
Vehicle: 02Terrano II 3.0 SVE Auto
Posts: 1,586
|
Diviy,
It's a tenner VERY well spent mate, great site, friendly folks, and so much help..... Try this link for a bash plate..... http://www.euro4x4parts.com/parts/3/...san/terrano_2/ https://www.roughtrax4x4.com/catalog...+II+skid+plate |
28-05-2018, 21:40 | #6 | |
Senior Member
Join Date: Sep 2014
Location: Yorkshire, J33 M62
Vehicle: 2000 Terrano lwb 2.7TDI
Posts: 5,500
|
Quote:
Oops, forgot to put the link in here it is http://www.nissan4x4ownersclub.com/f...ght=bash+plate |
|
28-05-2018, 22:55 | #7 |
Junior Member
Join Date: May 2018
Location: Wales
Vehicle: terrano
Posts: 14
|
cheers that gives me a good idea thanks get the welding sorted first then paint it all underneath then wheels and tyres and bash plate.im gutted I have a cracking set of Insa turbos but they only 205/80/16 a bit to small I think
|
28-05-2018, 23:50 | #8 |
Senior Member
Join Date: Sep 2014
Location: Yorkshire, J33 M62
Vehicle: 2000 Terrano lwb 2.7TDI
Posts: 5,500
|
Yeh thats just a smidge smaller than standard that is
|
Thread Tools | |
Display Modes | |
|
|